How Long are the Mounting Bolts with the Ultra-Fab Hitch Mounted Skid Wheels

Question

Question:

How long are the mounting bolts?

asked by: Travis L

0

Expert Reply:

The mounting bolts included with the Ultra-Fab Rotating Hitch Mounted Skid Wheels, part # UF48-979014, are 4-1/4 inhces long.

I've linked a video that shows other measurements as well.

expert reply by: Charles S

0

click to enlarge

Answer 1

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 2

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 3

The closest match we have is the part #e54SR which is for a 3,500 lb axle and is 25-1/8 inches long. It would be a bit longer than what you have but it would work.

view full answer...

Answer 4

For a 4-way trailer wiring harness for your 2017 Lexus RX350 that has the tow package you would want the part #56083 which is a confirmed fit. This harness does not have a converter box built into it and it just plugs right into a port you have at…

view full answer...

Answer 5

The LaSalle Bristol XTRM PVC RV Roof Membrane #3441700534142711440 ships rolled up on a tube just like how it's pictured.

view full answer...

Answer 6

We do have the LaSalle Bristol XTRM Roof Installation Kit #3442703414KIT that is used to install the LaSalle Bristol XTRM Roof Membrane #3441700534142711440 that you referenced. I'd check with local RV dealers to you to see if any can install…

view full answer...

Answer 7

The Titan Brake Actuator #T63FR doesn't have a specific manual. There are just parts of a catalog that refer to it. I've attached those photos to assist. This product is the drum brake actuator for the Aero 7500 and has a manual lockout for…

view full answer...

Answer 8

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will be…

view full answer...

Answer 9

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 10

The correct replacement for the Oil Seal 225255UC is the Oil Seal part #9103309. These both have a 2.24/2.25" inner diameter and 3.37" outer diameter. They are also designed for use with oil bath hubs.

view full answer...