Fastway Weight Distribution System Recommendation for Trailer with 720 lbs Dry Tongue Weight

Question

Question:

Whata the difference between FA94-00-1000 and FA92-00-1000??

asked by: Kamil

0

Expert Reply:

If your dry tongue weight is 720 lbs the kit you'd want is the part # FA94-00-1000. This has the tongue weight range of 600-1,000 lbs which would be ideal for your trailer's tongue weight when loaded.

To install the included will require a thin walled socket like the part # ALL643216 as well.

expert reply by: Jameson C

0

Kamil

2/17/2018

Whata the difference between FA94-00-1000 and FA92-00-1000??

Reply

Jameson C.

2/17/2018

The part # FA94-00-1000 is a round bar setup and the # FA92-00-1000 is a trunnion bar setup. Both are rated the same for 600-1,000 lbs tongue weight. Both round and trunnion bar systems are equally as effective, but a round bar system won't have as much ground clearance under it as a trunnion bar system. This is because the bars attach to the weight distribution head from underneath. If your tow vehicle is a full sized pick-up or SUV, a round bar system would work just fine. If you're towing with a small crossover or a minivan (anything with little ground clearance) you'd definitely want to go with a trunnion bar system.

Reply

Answer 1

To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind…

view full answer...

Answer 2

The round bar extends about 2-1/2 inches below the weight distribution head, while the trunnion bar does not extend below the weight distribution head at all, as you can see in the side-by-side photo I edited for you. This is why we recommend folks…

view full answer...

Answer 3

To install our very popular P3 brake controller part #90195 in your 2018 Ford F-150 will only require the correct install harness. For that you'd want the #22292 which is a confirmed fit and simply plugs in under the dash. Some versions of your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 7

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 8

Yes, the Replacement Cover #PE48UV will indeed fit the 2018 Ford F-150 extended cab with the 67" bed. This is made to be a replacement cover for the Pace Edwards JackRabbit Retractable Hard Tonneau Cover #311-JRFA05A28 which is specifically for…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

I spoke with my B&W representative who confirms that to install their GNRK1121 #BW77FR Turnover Ball hitch on a 2021 Ford F-150, the center of the 4 inch hole for the gooseneck ball would be placed 42-5/8 inches forward of the rear edge of the…

view full answer...

Answer 12

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Fastway Weight Distribution System Recommendation for Trailer with 720 lbs Dry Tongue Weight

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching