What is Max Frame Dimension the Fulton Snap-Ring Swivel Marine Jack # F1410050149 can Fit

Question

Question:

What is the largest trailer tongue size this jack will fit?

asked by: John B

0

Expert Reply:

The max frame dimensions the Fulton Snap-Ring Swivel Marine Jack # F1410050149 can fit on is 3" x 5". That's 3 inches wide and 5 inches tall.

expert reply by: Jameson C

0

Answer 1

I was able to have our warehouse measure the mounting plate for the Ark Extreme Off-Road Swing-Up Trailer Jack #ORJW350D you were looking at and included a diagram showing its dimensions. The Ark #ORJW350D mounting bracket measure 7-1/2" tall x…

view full answer...

Answer 2

I think your best option would be to get a Fulton Snap-Ring Swivel Marine Jack #F1410050149. This should attach to your 2 inch by 2 inch trailer frame and provide you with a light weight jack for your Yakima Rack and Roll trailer. You should be…

view full answer...

Answer 3

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

What is Max Frame Dimension the Fulton Snap-Ring Swivel Marine Jack # F1410050149 can Fit

Product Page this Question was Asked From

Continue Researching