Trailer Hitch for a 2014 Mercedes Sprinter 3500 with 144 Inch Wheelbase and Factory Step Bumper

Question

Question:

So I’m not really sure which hitch to order, one of the reviews mentioned that rear frame had a different measurement if you have a passenger van or a cargo can chassis do i order # 75601 or 75549

asked by: Ralph L

0

Expert Reply:

For your 2014 Mercedes Sprinter 3500 with 144 inch wheelbase and factory step bumper you will use hitch # 75601. But to be sure you can measure the width of the frame. Frame width is measured from the outside of one frame rail to the outside of the other. If your measurement is 30-3/8 inches then this hitch will NOT fit your van.

expert reply by: Michael H

0

Answer 1

Yes the Draw Tite hitch part #75601 does attach to the outsides of the frame rails of your 2020 Mercedes Benz Sprinter 2500. You can see this in the install instructions diagram that I attached to this page.

view full answer...

Answer 2

For your 2021 Mercedes Benz Sprinter 3500 that has a 170 inch wheelbase and factory rear step the correct fitting hitches are the Curt #13358 and the Draw Tite #75601. These hitches are virtually identical in capacity and design with only notable…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75601 is the only available trailer hitch options for a 2020 Mercedes-Benz Sprinter 2500 170" Wheelbase Passenger Van with Step Bumper. That said, you'll need to be sure you…

view full answer...

Answer 4

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75601 is listed as a fit for a 2019 Mercedes-Benz Sprinter 2500 Passenger Model 170" WB with Step Bumper. That said, you need to make sure you don't have a model with 30-3/8" frame,…

view full answer...

Answer 5

I did some checking and the Draw-Tite trailer hitch #75549 does indeed fit the dually model of the 2016 Mercedes Sprinter 3500. If you plan on doing some towing I recommend etrailer ball mount kit #989900. It comes with 2 ball mounts; one with a 3/4…

view full answer...

Answer 6

I checked with my technical contact at Cequent Performance Products, parent company of Reese, Draw-Tite and other brands, and I am glad to confirm that you do have an option for a hitch for your 2013 Mercedes Sprinter 3500 DRW 144-Inch Without Step…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...