What Does Replacement Electric Winch K2EW8020 Fit?

Question

Question:

what is the mounting for the k2ew8020 winch ?

asked by: Isaac

0

Expert Reply:

The Replacement Electric Winch for Detail K2 Snowplows # K2EW8020 is a direct fit as a replacement for a number of Detail K2 Snowplows. It is designed to be mounted with the Avalanche # K2AVAL8219 and # K2AVAL8422, Rampage K2RASP8219 and Rampage II # K2RAMP8219, Storm K2STSP8422 and Storm II # K2STOR8422 as well as the Summit K2SUSP8826 and Summit II K2SUMM8826.

This replacement includes the cab-mounted switch which allows you to use your K2 from inside your truck.

expert reply by: Kyle S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Thanks For the photos of your hinges. That helps a lot when we are trying to find something for a customer. I have attached a photo of a hinge, part #PLR1902 that may work for you. You can check out the photo and see the dimensions for the hinge.…

view full answer...

Answer 3

The Ramp Door Hinge #PLR1902 does require welding of both portions. The tab gets welded as you stated to one side and the outside cylinders get welded to the opposite side. I've attached a couple pictures to assist.

view full answer...

Answer 4

I spoke with Optronics and they informed me that if you used the full reel of the Optronics Flexible LED Light Strip - Weatherproof - White - 17 Long Item #UCL90CB the amperage draw would be 2.7 amps.

view full answer...

Answer 5

Installing the Hinges on your Side-Door Bar Lock Assembly, item #305736, is pretty much up to you and the construction of your trailer. You will need to purchase appropriate hardware to install the Side-Door Bar Lock that you purchased. It is best if…

view full answer...

Answer 6

The black wire of the #K2WR100 does run to the negative post of the battery. I attached a picture that shows how it wires up. The picture might look a bit different since it's an older model but the wiring is the same.

view full answer...

Answer 7

I contacted SnowBear and the SNB-SB200 plow needs a bracket fit part #SB397-105 to fit the 2006 F-150. Since the snow plow is an older model it did not come with the cross member so you do need the cross member to attach the plow to the truck part…

view full answer...

Answer 8

You will want to use the Replacement Winch Strap for Detail K2 Snowplows #K2WS8020. This strap is rated for the weight of your Detail K2 Snowplow #K2AVAL8826. The working load is 1,500lbs with a break strength of 3,000lbs. The Replacement Strap for…

view full answer...

Answer 9

We don't have a video that details how to replace the strap of your K2 Winch like part #K2RASP8219, but I did speak to my contact at K2 and he gave me a brief description of the process. On the winch there is a u-bolt that needs to get removed…

view full answer...

Answer 10

The Replacement Electric Winch #K2EW8020 is meant to be a replacement for the winch that comes with the snow plows; Rampage K2RASP8219, Rampage II #K2RAMP8219, Storm K2STSP8422, Storm II #K2STOR8422, Summit K2SUSP8826, and Summit II K2SUMM8826. The…

view full answer...

What Does Replacement Electric Winch K2EW8020 Fit?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching