Can Window be Rolled Down A Little with Hopkins Sunscreen QuickCling Window Shade Attached

Question

Question:

Am wondering if these screens would be impacted if I lower the window? I travel with my dog in the back and would like to use both these plus the rear one to keep the heat off her while travelling... I tend to open the rear windows a couple inches for airflow for her.... These would be put in the rear of my Chev Duramax truck?

asked by: Karen L

0

Expert Reply:

The Hopkins Sunscreen QuickCling Vehicle Window Shade # HMSP4605041 referenced in your question is going to attach to the side window in your truck by using static electricity. This will do a nice job of keeping the shade in place, however opening the window might provide too much of a wind disturbance for the shade to stay attached. I recommend simply opening the windows as little as possible with the shade on so as to avoid this issue.

For the rear window, you can use part # SP280804R, which measures 39-3/8 inches long, 19-1/4 inches tall and will attach via 4 suction cups.

expert reply by: Chris R

0

Answer 1

If you wanted to cut the Hopkins Sunscreen QuickCling Vehicle Window Shade #HMSP4605041 to a smaller size you certainly could. It measures 12 inches by 16 inches. I attached a picture that shows what it looks like from a privacy point of view as…

view full answer...

Answer 2

Trailer wheel and tires like the part #AM32545 do not get balanced as it really doesn't make a difference and most of the time the weights just get bounced off due to the rougher suspension on trailers compared to vehicles. So if you wanted to…

view full answer...

Answer 3

I have a great mud flaps solution for you. Unfortunately, the only set of WeatherTech Mud Flaps that fit your 2022 Ram 3500 dually #WT110108 are only confirmed to fit the front fenders on vehicles without fender flares. If front flaps are what you…

view full answer...

Answer 4

First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part #PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage…

view full answer...

Answer 5

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 6

Yep! The iN-Command RV Tire Pressure Monitoring System #NCTP100 was designed to be compatible with the iN-Command setup you have on the center console of your 2020 Chevy Silverado 2500 so it will be visible on your truck's display.

view full answer...

Answer 7

The trailer hitches are finished with a durable powder coating. The Curt and Draw-Tite hitches are welded together from tube stock and flat steel that are very similar. In my opinion, Curt does a tiny bit better job with their powder coat…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

Hey Parrish, There was a design change in the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 so it unfortunately only comes with one hitch pin hole now and there unfortunately are no other compatible hitches available with a second hole for a…

view full answer...

Answer 11

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Answer 12

The best hitch for your 2017 Subaru Outback wagon will be the Draw Tite hitch part #75673 which is a Class III hitch with a 2 inch opening. This hitch size gives you the most flexibility with hitch accessories and the best capacities as well. I like…

view full answer...

Can Window be Rolled Down A Little with Hopkins Sunscreen QuickCling Window Shade Attached

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching