Ladder Rack Recommendation for 2015 GMC Sierra 1500

Question

Question:

I am looking to buy rack for my 2015 GMC sierra double 1500

asked by: Antonio

0

Expert Reply:

Looks like you are looking for a ladder rack for your 2015 GMC Sierra Double Cab 1500 with a 6-1/2 foot bed. The TracONE part # TH27000XT that you mentioned is a confirmed fit and would work well.

If instead you wanted a ladder rack that has uprights that can slide forward and back the part # TH43002XT-781 would be what you'd need.

expert reply by: Jameson C

0

click to enlarge

Answer 1

There's only one style of tonneau cover we can recommend that fits with the TracRac sliding ladder racks like the part #TH43002XT-781 that you have installed on your 2018 GMC Sierra 1500 6-1/2 foot bed. That's the BAK Revolver tonneaus like…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 4

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 5

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 6

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 7

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 8

The Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT actually only fits on the black TracRac rails which have a raised section for the base to fit on (see attached), as opposed to the RetraxONE XR rails which essentially have a T-Slot. The…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Thanks for sending in a picture of your thumb latch coupler and trailer jack. Based on seeing that we know the Hopkins Trailer Hitch Level with Cover part #HM09715 would fit and work great as we had chance to install this on the exact same coupler as…

view full answer...