Can the Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K be Used for a Saltwater Application
Question:
can thus hub be used on a boat trailer thats primarily used in saltwater? Will it hold up pretty good? Kind of late since I already ordered it today. But I still would like to know. Thank you!#
asked by: Donald T
Expert Reply:
Although hubs that have a black powder coat finish, like the Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K that you purchased, will not last as long against saltwater as one with a galvanized finish, like the Kodiak Trailer Hub # Q-HUB84545, you can still use it. The galvanized finish does a better job of resisting saltwater so it is preferred for your situation.
Hubs with the black powder coat finish can be used for saltwater applications but you will need to make sure to hose them off with fresh water after you are done loading your boat to help them last longer. There really is no formula for how long they will last, but just like anything else, if you take good care of it it will hold up fairly well.
Products Referenced in This Question
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Spoke Wheel - 5 on 4-1/2 - Load Range D
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: How Many Hubs Come with Part # 84545UC1-EZ
- Q&A: How to Pick Out Replacement Hub for a Trailer with Rusty Hub
- Q&A: How to Estimate Axle Weight Rating Based on Bearings Used in Hubs
- Q&A: Replacement Trailer Hubs Using L68149 and L44649 Bearings
- Shop: Grease Seals 10-36 (pair)
- Video: Choosing the Right Trailer Wiring
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 44649
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Lippert Solera Slider Slide-Topper Review
- Search Results: dust cap
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Gooseneck Hitch
on Trailer Hubs and Drums
