How to Pick Out Replacement Hub for a Trailer with Rusty Hub
Question:
which hub do i need?
asked by: Wanda W
Expert Reply:
Your question came in blank, but it looks like you are looking for replacement hubs based on the pictures you submitted.
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Spindle Recommendation for a Square 2x2 Axle
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Help Picking Out Replacement Hub for TDE 11033
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Search Results: wheel bearings
- Search Results: 84 spindles
- Q&A: #84 Spindle for 3,500 lb Axle
- Search Results: hub and spindle
- Search Results: ez lube spindle
- Search Results: buddy hubs
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB1938 Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Article: Overview of Lubricating Grease
- Q&A: Spare Hub for Boat Trailer with Bearing Dimensions of 1-3/8 inch and 1-1/16 inch
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-1K
- Q&A: Best Wheel Bearing Grease for a Trailer
- Video: Trailer Hub Inspection Demonstration
- Search Results: tilt trailer pin
- Search Results: coupler only