Recommended Coupler Lock and Padlock Compatible with Standard Travel Trailer Couplers

Question

Question:

Will this lock work on a standard travel trailer?

asked by: Doug

0

Expert Reply:

The EZ Lock Trailer Coupler Lock for 1-7/8", 2", 2-5/16" Bulldog Collar-Lok Couplers # BLTL-20 is specifically designed for a collar lock style coupler like # BD028657. For a standard travel trailer, you most likely do not have that style coupler, so I recommend the Blaylock EZ Lock Trailer Coupler Lock for 1-7/8", 2", and 2-5/16" Couplers - Aluminum # BLTL-33 for the same style that is compatible with most travel trailer coupler styles. If you want one with a padlock included, I recommend # BLTL-33-40D.

expert reply by: Jason S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

view full answer...

Answer 4

Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.

view full answer...

Answer 5

Yes, all you'll need to do is disconnect the three wires running from the converter section in your Progressive Dynamics 4100 #PD4135K from the AC distribution panel (circuit breaker, ground bus bar, neutral bus bar). This will cut the power…

view full answer...

Answer 6

Yes, the Redarc Tow Pro Liberty part #RED52VR can install in your 2023 Ford Ranger that has the factory 7-way. It would wire directly to the brake controller install wiring that is present under the dash.

view full answer...

Answer 7

We have electric drum brakes rated for 4400-lb axles (and hydraulic drum brakes rated for 3750- and 5200-lb axles) but none rated for exactly 4000-lbs. For electric drum brakes in the 10 x 2-1/4-inch size for a 5th wheel the 4400-lb-rated brakes will…

view full answer...

Answer 8

We do actually have Dexter electric drum brakes in your required 10 x 1-1/2-inch size, parts #K23-473-00 and #K23-472-00, which are right- and left-hand, respectively. These are complete bolt-on (4-bolt) replacements that fit wheels diameters from…

view full answer...

Answer 9

Sure thing! The EZ Lock Trailer Coupler Lock #BLTL-20 is for Bulldog Collar-Lok-style couplers while the EZ Lock Trailer Coupler Lock #BLTL-33 is designed for Fulton, Shelby, Dutton-Lainson, Atwood, and similar couplers. I've attached some review…

view full answer...

Answer 10

If the Pullrite Superglide you have was designed to fit the industry standard rails (it will have ISR listed in model name), then yes the Demco rail kit part #DM8552025-71 would work. If not, then the only rail kits that will work are from Pullrite.

view full answer...