Height of DeeZee Custom Headache Rack # DZ95050RTB

Question

Question:

I just wanted to know how tall this product is because I would like to know how much it would stick out over my roof if truck.

asked by: James

0

Expert Reply:

The DeeZee Custom Headache Rack - Mesh Screen - Aluminum - Textured Black Powder Coat # DZ95050RTB is 24 inches tall. The tie-downs will add another 6 inches when used on top for a total of 30 inches needed for clearance above the bed rails.

expert reply by: Jason S

0

click to enlarge

Answer 1

The overhead bar on the DeeZee Aluminum Cab Rack part #DZ95050R is going to be more of an octagonal shape than a rounded shape. Aside from the color, it will be the same shape as show on the DeeZee Custom Headache Rack - Mesh Screen - Aluminum part…

view full answer...

Answer 2

Yes, I confirmed with my contact at DeeZee that the load stops on the DeeZee Custom Headache Rack #DZ95050RTB is completely removeable.

view full answer...

Answer 3

According to my contact at Rola the height of the base on the T3 truck bed ladder rack #59799, that sits on the bed rail to the top of the crossbar is 27 inches. I have linked the above mentioned product to this page for your convenience.

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 7

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 8

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 9

To utilize the Titan Chain Sliding Lashing Winch for Flatbed Truck or Trailer #TCLR900 you need the following: - Brophy Winch Bar for 2" Lashing Winch #W2BZ - etrailer Sliding Winch Track #e48ZR

view full answer...

Answer 10

The only troubleshooting you can really do with the K-Source Custom Extendable Towing Mirrors #KS62093-94G would be to check that the wire harness is fully connected and that you didn't blow a fuse in the truck that could've killed the power…

view full answer...

Answer 11

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Height of DeeZee Custom Headache Rack # DZ95050RTB

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching