If Trailer Spindle Is Bad Can Entire Axle be Replaced
Question:
When spindle is bad,why not replace axil.
asked by: Victoria E
Helpful Expert Reply:
That's actually what we typically recommend. Replacing spindles can be more trouble than it's worth so if replacing the entire axle is an option it's the better route.
To determine the axle size you will need there are some measurements needed. First, if you are replacing the axle then you can measure the one you have. Measure from the center of one spring seat to the center of the other spring seat. Then measure from hub face to hub face. I included a picture showing where to measure.
In the picture the spring seat measurement is 74 inches and the hub face measurement is 89 inches. This is just an example.
If the trailer does not have an axle then measure from the center of one frame rail to the center of he other frame rail. Do you know the capacity you need? If we do not have an axle that has the exact measurements and capacity you need then there are a couple of options.
First, you could special order an axle locally. Or you could use a Timbren axle-less system which would have the suspension built in. I have included a link to our axle main page and a link to the axle-less systems separately.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ramp door hinge
- Search Results: hinge
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Article: How to Measure a Trailer Axle
- Q&A: 89 inch 3,500 lb Trailer Axle with 5 on 5 inch Bolt Pattern Trailer Hubs
- Q&A: How to Measure for a Replacement Trailer Axle
- Q&A: Can Axle with 87 Inch Hub Face to Hub Face Measurement be Replaced with Axle 35545I-EZ-89
- Q&A: Shipping Weight of Dexter Trailer Axle T20BTR-EZ-7258
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Are Leaf Springs Sold Individually or as a Pair
- Search Results: square axle
- Search Results: sp169275
- Search Results: four winns
- Search Results: axle
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APS4 Review
- Search Results: 2500 lb trailer axle
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings