Front Mounted Trailer Hitch for Motor Home on 2017 Ford E-450 Chassis

Question

Question:

Looking for model to carry kid motorcycle up front. I see 65053 modrl, still same? 2017 Ford E-450 Thanks

asked by: Chuck

0

Expert Reply:

I can confirm for you that the Draw-Tite # 65053 front mounted hitch will fit on your 2017 Ford E-450. For a motorcycle carrier that would work great I recommend checking out the etrailer Motorcycle Carrier # e98873. I've also added a link to our selection of motorcycle carriers for you to take a look at.

expert reply by: Kyle S

0

Answer 1

In regards to the Roadmaster Hitch Mounted Spare Tire Carrier part #RM-195225, the distance from the center of the rear-most hitch pin to the back of the upright is 8-3/4" and 5-1/4" from the front-most hitch pin hole. I have attached a…

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver #65053 and a spare tire carrier like the Roadmaster #RM-195225 you were looking at will work just fine on your Ford E-Series Cutaway. Any time you mount something to the front of the vehicle like this…

view full answer...

Answer 3

We don't carry a bumper mounted spare tire carrier capable of the weight of a Class C Motorhome spare tire, however, we do have a hitch mounted option. The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening #RM-195225 is an…

view full answer...

Answer 4

Yes, the Hollywood Racks bike rack and Roadmaster spare tire carrier can be used together on your motorhome, with the part numbers of the two being the following: - Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR - Roadmaster Hitch…

view full answer...

Answer 5

Though the Roadmaster Hitch Mounted Spare Tire Carrier #RM-195225 does have a 400 pound tongue weight capacity, it does reduce the tongue weight capacity of your hitch by 33 percent. So if your hitch is rated to 500 pounds of tongue weight, as an…

view full answer...

Answer 6

I recommend using the Swagman XTC4 4-Bike Rack for 2" Hitches - Platform Style #S64665 because the platform will keep the bikes mostly out of your field of vision better than a hanging rack would. The XTC4 is rated for use on a Class C RV and I…

view full answer...

Answer 7

We do offer several types of bike carriers designed and rated for use on the front of an RV, including the platform style such as the Swagman Dispatch #S44FR. This carrier features a folding upright mast that allows you access to the vehicle cargo…

view full answer...

Answer 8

The Draw-Tite Front Mount Trailer Hitch #65053 is a great option for using a bike rack on the front of your 2018 Ford E-450. The distance from the center of the hitch pin hole to the forward-most part of the bumper is 2". If you don't…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Robert, for a 5,200 lb Dexter Torflex axle like what you have we have the Dexter lift kit part #K71-724-02 which will give you a lift of 2-7/8 inches.

view full answer...