Replacement Lock Core Kits for Kuat Roof Bike Racks

Question

Question:

can you make keys Kuat bile rack

asked by: Wolf

0

Expert Reply:

We do not cut replacement keys for Kuat racks but we do offer Replacement Lock Core kits like # LOCO, # LOCO4, # LOCO6 that consist of lock cores, two keys and the core removal too.

expert reply by: Adam R

0

Answer 1

Kuat used to have specific replacement keys, but now they send you randomly numbered lock cores and matching keys. Before I could recommend that you look for the number on the lock's face of your Kuat NV #NV22B and getting the matching key,…

view full answer...

Answer 2

If the locks are in the unlocked position you would not need the original keys to install new lock cores like with the Replacement Lock Cores for Kuat Cargo Carriers and Bike Rack #LOCO4 you'd just insert the change key into the lock core…

view full answer...

Answer 3

Yes, the Replacement Lock Cores 2 #LOCO, 4 #LOCO4, and 6 #LOCO6 will fit the locking covers on your Kuat Skinny basket.

view full answer...

Answer 4

I have a possible solution for you. First, though, it's important to note that Kuat does not offer replacement keys or cable locks. Also, since Kuat gives random keys for their replacement lock cores, the odds of you getting the same key…

view full answer...

Answer 5

In the past, Kuat would be able to match keys with lock cores based on the code, but now that is not necessary as you would just need to order Replacement Lock Cores #LOCO for your Kuat NV Bike Rack #NV22B. This comes with 2 lock cores, 2 keys, and…

view full answer...

Answer 6

The integrated locks for your Kuat NV 2.0 Bike Rack like #NV22B will have the key number stamped both on the keys themselves and on the lock cores right above the key slot. The numbers on the keys are pretty small and hard to read but there should be…

view full answer...

Answer 7

To have all your locks keyed alike on the 2-Bike Add-On #BA02B and your Kuat NV 2.0 Base Bike Rack #BA22B you will need the Replacement Lock Cores for Kuat Cargo Carriers and Bike Racks #LOCO6. The replacements come with 6 lock cores and 2 keys for…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Replacement Lock Core Kits for Kuat Roof Bike Racks

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching