How to Replace the Lock Cores of a Kuat Cargo Carrier or Bike Rack if you Don't Have the Keys

Question

Question:

I have a Kuat NV. first gen. Im looking for new cable lock and keys to replace on mine as I have lost the keys. Ive looked everywhere and cant seem to find any replacement lock kit. Im wondering if you guys can help me out? Or maybe point me in the right direction. Thank you

asked by: Johnny

0

Expert Reply:

I have a possible solution for you.

First, though, it's important to note that Kuat does not offer replacement keys or cable locks. Also, since Kuat gives random keys for their replacement lock cores, the odds of you getting the same key with those are very low. Finally, in order to replace the core with a new one yourself, you need the original key.

Therefore, the only recourse is to purchase the Replacement Lock Cores for Kuat Cargo Carriers and Bike Racks, part # LOCO, and take those cores along with the rack to a locksmith. Once they have what the cores look like, they will better be able to either unlock the current core or drill it out.

I've linked to a video of these cores so you can see how they are meant to be replaced.

expert reply by: Kef G

0

Answer 1

The Thule T2 Pro X #TH83GC carries 2 bikes, has a hitch lock but the bike locks are sold separately. It carries bikes up to 50 pound with a max tire width of 3 inches. The distance from the hitch pin to the closest part of the rack is 6-3/4 inches.…

view full answer...

Answer 2

Kuat used to have specific replacement keys, but now they send you randomly numbered lock cores and matching keys. Before I could recommend that you look for the number on the lock's face of your Kuat NV #NV22B and getting the matching key,…

view full answer...

Answer 3

In the past Kuat gave us the ability to pick out replacement keys for their racks but at this time the only solution is to go with the part #LOCO4 which gives you new lock core, a change key, and new keys so you can rekey your ski rack.

view full answer...

Answer 4

In the past, Kuat would be able to match keys with lock cores based on the code, but now that is not necessary as you would just need to order Replacement Lock Cores #LOCO for your Kuat NV Bike Rack #NV22B. This comes with 2 lock cores, 2 keys, and…

view full answer...

Answer 5

We do not cut replacement keys for Kuat racks but we do offer Replacement Lock Core kits like #LOCO, #LOCO4, #LOCO6 that consist of lock cores, two keys and the core removal too.

view full answer...

Answer 6

The integrated locks for your Kuat NV 2.0 Bike Rack like #NV22B will have the key number stamped both on the keys themselves and on the lock cores right above the key slot. The numbers on the keys are pretty small and hard to read but there should…

view full answer...

Answer 7

If the locks are in the unlocked position you would not need the original keys to install new lock cores like with the Replacement Lock Cores for Kuat Cargo Carriers and Bike Rack #LOCO4 you'd just insert the change key into the lock core…

view full answer...

Answer 8

At one time we were able to obtain specific lock cores from Kuat, but they only offer the cores in randomly numbered sets of 2, part #LOCO, sets of 4 as part #LOCO4 or 6 as #LOCO6. If you purchase a set, all the cores will be keyed alike. So your…

view full answer...

Answer 9

I spoke with my contact at Kuat and he informed me that the Vagabond you have is compatible with any of the their lock cores so the part #LOCO you referenced will work well.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

How to Replace the Lock Cores of a Kuat Cargo Carrier or Bike Rack if you Don't Have the Keys

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching