Replacement Handles for a Yakima SkyBox 18

Question

Question:

I have a Yakima skybox 18. The front latch is broken. Not the bottom one to the car, but the one to lock the top down. Could you please instruct me on what to buy to replace and fix?

asked by: Robert L

0

Expert Reply:

To replace your handles, you'll need to buy part # Y8880348. This will include two new locks and keys for your SkyBox.

expert reply by: Jacob W

0

Answer 1

Thanks for the photo. I see you are looking for the Replacement SuperLatch Handle Assemblies part #Y8880348 (2009+ Models Only). This installs in the hole you have attached a photo of.

view full answer...

Answer 2

It sounds like your Skybox has already been tampered with as this is not normal at all. I recommend you replace the entire assembly using the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2 #Y8880348. These…

view full answer...

Answer 3

To open your Yakima SkyBox with the handles not engaging you'll have to drill them out, unfortunately, and that does mean you need to replace the latches. The correct part is the following: - Replacement SuperLatch Handles for Yakima SkyBox Cargo…

view full answer...

Answer 4

Installing the Curt #C13427 on your new 2022 Hyundai Palisade will not require any drilling to get fully installed. With that said, there is a very minor, and I do mean very minor, trimming that may be needed to get a panel reinstalled after the…

view full answer...

Answer 5

I reached out to my contact at Yakima and we are a little confused on what you are referring to. If it is part of the lock itself on your Yakima SkyBox 16 Rooftop Cargo Box - 16 cu ft - Black Carbonite, #Y07335, you will want to replace the lock with…

view full answer...

Answer 6

If you have a newer Yakima SkyBox NX 16 like part #Y95AV then you should be able to just open the box from the other side. That said, there really isn't a good way to go about opening this without the latch installed. If you like you can try to…

view full answer...

Answer 7

Your best option for replacing the SuperLatch Handle Assemblies #Y8880348 on your Yakima SkyBox will be to try and remove that broken key. What I recommend doing is purchasing a key extractor from a local hardware store. These small and inexpensive…

view full answer...

Answer 8

Based on what you are describing it sounds like both of the latches need to be replaced. The correct replacement part is the Replacement SuperLatch Handles for Yakima SkyBox Cargo Boxes - Qty 2 #Y8880348. I would try replacing the latches and go from…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Replacement Handles for a Yakima SkyBox 18

Product Page this Question was Asked From

Continue Researching