Gaining Access to Yakima SkyBox with Broken Key Stuck Inside Lock Core

Question

Question:

How to replace the latch/handles when box is locked? Hi, My skybox is locked and the key broke off in the lock. Im unable to remove the broken part from the lock core, so replacing the core wont help. How can I replace both latches when locked? Do I first buy the a replacement key so I can open one half, or is there an easier way? Thanks!

asked by: Val V

1

Helpful Expert Reply:

Your best option for replacing the SuperLatch Handle Assemblies # Y8880348 on your Yakima SkyBox will be to try and remove that broken key. What I recommend doing is purchasing a key extractor from a local hardware store. These small and inexpensive metal tools/hooks can be used to fish out the metal key piece that's stuck inside the core.

Once you have the key removed it's just a matter of obtaining a replacement so you can unlock the box and replace the latches if needed. If you can tell me your key number I will be happy to recommend the correct replacement.

I did reach out to my contact at Yakima as well regarding your situation and she agreed that this was the best route to take. They strongly advise against drilling the lock core out (which would be your only other option if you can't remove the broken key) as you can easily damage the lock housing when doing this, which isn't a replaceable part.

expert reply by: Chris R

1

Answer 1

If you have a newer Yakima SkyBox NX 16 like part #Y95AV then you should be able to just open the box from the other side. That said, there really isn't a good way to go about opening this without the latch installed. If you like you can try…

view full answer...

Answer 2

According to Yakima, the serial number is stamped into the plastic on the underside of the box next to one of the crossbar clamps.

view full answer...

Answer 3

Is there a model name on the box anywhere? If the box has the SKS system, you would be able to use a control key, part #Y8007835 to remove the lock cylinder if it's currently unlocked. Insert the key and apply a little side pressure. If you…

view full answer...

Answer 4

The Replacement SuperLatch Handle kit, part #Y8880348 will include everything you need to replace both handles and comes prepackaged with a pair of matching SKS locks and keys that you can replace the existing. In this case, I do recommend a…

view full answer...

Answer 5

Based on what you are describing it sounds like both of the latches need to be replaced. The correct replacement part is the Replacement SuperLatch Handles for Yakima SkyBox Cargo Boxes - Qty 2 #Y8880348. I would try replacing the latches and go…

view full answer...

Answer 6

Thanks for the photo. I see you are looking for the Replacement SuperLatch Handle Assemblies part #Y8880348 (2009+ Models Only). This installs in the hole you have attached a photo of.

view full answer...

Answer 7

The correct replacement handles for a Yakima SkyBox made from 2009 on is the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes #Y8880348. These come in a quantity of two with lock cores and keys, so you have the right…

view full answer...

Answer 8

You've tried what we normally recommend by spraying a penetrating oil into the lock cylinder but what you can in addition to that try is to spray the oil into the lock and then work the key in an out several times as that sometimes can free up…

view full answer...

Answer 9

You should be able to open the box from the other side. Once you have the other side open you can then replace the handle you took to the locksmith. Unless the locksmith wasn't able to fix the issue. If you need replacement handles we carry them,…

view full answer...

Answer 10

I wish there was a trick to opening the Yakima SkyBox 21 Rooftop Cargo Box #Y07337 with the handles broken off, but there is nothing that is feasible; you can try using a Channel Lock but it doesn't seem likely you can do it without damaging the…

view full answer...

Answer 11

Yes, technically you can remove the lid of this Yakima RocketBox Pro 14 Rooftop Cargo Box 14ft, part #Y07192, but I do not recommend it. The box has a simple ball and socket joint that you will have to disengage to remove the lid. Once the lid has…

view full answer...

Answer 12

You would first have to remove the broken key from the lock and use the control key that came with the box to remove the lock core. You can then get the 4-digit number from the side of the lock core and order new keys. If the key is stuck try…

view full answer...

Gaining Access to Yakima SkyBox with Broken Key Stuck Inside Lock Core

Product Page this Question was Asked From

Continue Researching