Replacement Hinge Lid Support for Older Rocket Box Rooftop Cargo Carrier

Question

Question:

Will the Thule Replacement Hinge, part # TH14936 fit a vintage era 1995 - 2000 Rocket Box? Its the long car top carrier box. thanx

asked by: George

0

Expert Reply:

For your older Rocket Box rooftop cargo carrier, I recommend the Replacement Lid Support for Yakima Cargo Boxes # 8880683. The Thule Replacement Hinge # TH14936 you referenced will not be compatible.

expert reply by: Jason S

0

Answer 1

Thanks for the photo, and we have been told previously by Yakima that you can indeed change out the lock cores on the older cargo boxes with the SKS system, so you can use the Yakima Same Key System (SKS) Lock Cores #Y07202.

view full answer...

Answer 2

I took some measurements of the Replacement Lid Support for Yakima Cargo Boxes #8880683 for you to compare with your Space Case Roof Box. From hole center to hole center when extended it measures 11 inches and when closed 3-3/8 inches. The overall…

view full answer...

Answer 3

You're looking for the Replacement Lid Support for Yakima Cargo Boxes #8880683, which will be the direct replacement for your broken Yakima support. You can re-use the hardware from the old hinge.

view full answer...

Answer 4

For starters, there are a few different generations of the Yakima SkyBox 16 and I would need to know which one you have in order to recommend the correct replacement hinges. I called Yakima and they were not able to reference the part number you…

view full answer...

Answer 5

We do indeed offer a replacement hinge for your Thule Cascade roof cargo box. You'll need part #TH14936. The hinges are sold individually, so if you need more than one be sure to order the correct quantity.

view full answer...

Answer 6

I have a great solution for you. Unfortunately, I confirmed with Thule that the Replacement Lid Lifter Hinge for Thule Cargo Boxes #TH14936 is not compatible with the Thule Motion XT XL #TH629806. However, the part that you need is the Replacement…

view full answer...

Answer 7

The correct updated front and rear hinge/lid support for a Yakima Skybox 18 is the Replacement Lid Support for Yakima Cargo Boxes part #8880683 for the front and then the Replacement Lid Support for Yakima Cargo Boxes part #8880684 for the rear. I…

view full answer...

Answer 8

Yes, the Replacement Lid Support for Yakima Cargo Boxes #8880683 will absolutely still allow you to open your Yakima SkyBox 16 Roof Cargo Box #Y07335 on both sides. I confirmed with Yakima that this support is the correct front and rear replacement…

view full answer...

Answer 9

The correct rear hinge for your Yakima SkyBox 18, like part #Y07336, is the Replacement Lid Support #8880683. I spoke with my contact at Yakima who confirmed this as well.

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Replacement Hinge Lid Support for Older Rocket Box Rooftop Cargo Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching