Replacement Bike Repair Stand Part for Kuat NV 2.0 Platform Bike Rack BA22B

Question

Question:

Do you have the black version of this part?

asked by: William L

0

Expert Reply:

The Kuat replacement bike repair stand in black is offered as part # TDKB which fits their NV 2.0 Base platform rack # BA22B. It also works with their Tri-Doc Repair Stand models # TDSNVG (gray) and # TDSNVO (orange).

expert reply by: Adam R

0

Answer 1

The Kuat Trail Doc Bike Repair Stand #TDKB is a fit for your Thule T2 but only with an adapter. If you don't already have the adapter, it is no longer an available part to add to your rack. My contact at Kuat said they have discontinued making…

view full answer...

Answer 2

The Trail Doc for Kuat NV 2.0 Base Platform Rack part #TDKB which is for the Kuat NV 2.0 Base Bike Rack for 2 Bikes part #BA22B will hold 45 lbs.

view full answer...

Answer 3

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 4

There were quite a bit of updates for the new NV which Kuat spent three years working on. One of the biggest differences the new Kuat NV 2.0 part #NV22G has over the previous version is that the wheel cradles can now accommodate tires up to 4.8…

view full answer...

Answer 5

The Kuat bike rack shank adapter #D101 is held on to the bike rack shank using 2 allen head screws. You would just need the appropriate size allen wrench to unscrew them from the shank and then you can take the adapter off and use the bike rack in a…

view full answer...

Answer 6

Sounds like you're trying to replace the shank on the original Kuat NV with a 2" shank from the newer NV? No, that will not be possible. There are so many design differences between the two bike racks that a retrofit like that will not work.…

view full answer...

Answer 7

For a trailer hitch I recommend the etrailer.com Trailer Hitch Receiver #E98847 because it has the most bumper clearance and comes with a matte black finish that does a better job of hiding scratches and dings over the glossy black options. Trailer…

view full answer...

Answer 8

For the most part the Curt #13268 and the Draw-Tite #75671 and #76116 are going to be the same hitch; they're all square tube designs and provide you with a 2" receiver. I generally prefer Curt hitches when available since we've found…

view full answer...

Answer 9

You are correct, the 2013 Honda Accord sedan does have a listed towing capacity of 1,000 pounds gross trailer weight and 100 pounds tongue weight. Even though the hitches available, such as Curt hitch #C11681, are rated higher you will still need to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Bike Repair Stand Part for Kuat NV 2.0 Platform Bike Rack BA22B

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching