Replacement Hitch Pin for Yakima HoldUp 2 Bike Rack Y02445

Question

Question:

Will this hitch bolt fit my Yakima Hold Up 2, model number Y02445. My vehicle has a 1.25 inch OEM hitch. It is a 2014 Subaru Outback. Thank you.

asked by: James B

0

Expert Reply:

Yes, Yakima Replacement Hitch Bolt # Y8880129 is the correct item to secure the HoldUp Hitch Bike Rack # Y02445 in your 1-1/4-inch Class II hitch.

expert reply by: Adam R

0

Answer 1

The bike rack you have selected will fit in a 2 inch by 2 inch hitch. The Class II only disclaimer is for the 1-1/4 by 1-1/4 inch hitch model of this bike rack, #Y02445. The differences between class II and class III are the size of the hitch…

view full answer...

Answer 2

The Yakima HoldUp, #Y02443, is designed to fit in 2 inch trailer hitch receivers. If you have a 1-1/4 inch Class II hitch opening you would need #Y02445. Next you will need to take an important measurement to make sure the rack clears the rear of the…

view full answer...

Answer 3

Yes, we have just the thing for your 2022 Kia Sorrento! The RockyMounts MonoRail Solo Bike Rack for 1 Bike #RKY10007 will work great for you! This bike rack is class I-III compatible, so it will work with your hitch you already have, and is capable…

view full answer...

Answer 4

Comparing Yakima Hitch Pins for 1-1/4 inch receivers #Y8880129 and #Y8890176, they looked identical to me, so I contacted Yakima and they are in fact identical parts. They just give different numbers to them for some reason, but the diameter, pitch,…

view full answer...

Answer 5

Replacement Threaded hitch pin #Y8880129 is indeed longer than the original bolt. It is 4.28 inches long overall. Something that you should know though is that when using a hitch adapter like you mentioned it reduces the tongue weight capacity of the…

view full answer...

Answer 6

The replacement mounting hardware for the 1-1/4 inch versions of the Yakima HoldUp (2008 to present) is actually #Y8880129. Replacement hardware #8890260 is for HoldUp models that fit 2 inch receivers only.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Replacement Hitch Pin for Yakima HoldUp 2 Bike Rack Y02445

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching