Replacement Jack Foot for Lippert Electric Jack

Question

Question:

We lost the bottom part for 1817941. The part dropped off and we cannot locate it. Is it possible to get that piece?

asked by: Power J

0

Expert Reply:

If by bottom part of Lippert Electric Jack # LC285318 you were talking about the foot plate, then you would want replacement # LC165253. I've added a link to a video review of this part for you to take a look at.

expert reply by: Kyle S

0

Answer 1

A replacement post is not available for the Lippert Electric Trailer Jack #LC285318; if yours is bent and unable to retract you would need to replace the entire unit.

view full answer...

Answer 2

The Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black #LC285318 has a drop leg available that will give an extra 4-1/2 inches with #LC405217.

view full answer...

Answer 3

The part number 1817941 is the old part number for the #LC285318 electric tongue jack made by Lippert. Unfortunately we do not offer a replacement leg for your jack, but if you wish to replace it then part #LC285318 would be the jack you would need.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 9

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 10

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 11

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Replacement Jack Foot for Lippert Electric Jack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching