Can the Hydrastar EOH actuator # HBA16 be Used with OEM Brake Controller on a 2018 GMC Sierra 2500

Question

Question:

is the Hydrastar EOH actuator #HBA16 compatible with the electronic braking system in a 2018 GMC Sierra 2500HD r would I need a 3rd party controller? thanks.

asked by: Robert K

0

Expert Reply:

The HydraStar Electric Over Hydraulic Actuator for Disc Brakes # HBA16 is actually already compatible with the OEM brake controller in your 2018 GMC Sierra without any kind of adapter. You can definitely upgrade to an aftermarket controller if you want, but you aren't required to since your OEM controller is compatible.

expert reply by: Jon G

0

Answer 1

The HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi #HBA16 will have a draw on the 12V power from your 7-way when connected. If your vehicle has a factory 7-way this power may turn off when the ignition is turned off and that…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

You certainly can! Installing a brake controller is fairly easy if you are familiar with running wiring. To install a brake controller like the popular Tekonsha Prodigy P3 #90195 you will need to run the wires on the pigtail to the following…

view full answer...

Can the Hydrastar EOH actuator # HBA16 be Used with OEM Brake Controller on a 2018 GMC Sierra 2500

Product Page this Question was Asked From

Continue Researching