How to Uninstall the Edge Diesel Evolution CTS3 Performance Tuner

Question

Question:

I sold my programmer but it is not working I need to know do you know how to uninstall it Edge evolution CTS two on my Chevrolet Silverado 08

asked by: Eric

0

Expert Reply:

You will need to perform the "factory reset" feature on the Edge Diesel Evolution CTS3 Performance Tuner part # EP69YR in order to reinstall on another vehicle.

In order to reset the tuner back to stock you will need to plug the tuner into your vehicle's OBDII port and allow the tuner to turn on. Then follow these steps.

Step 1: Enter the Quick Link menu

Step 2: Press the Settings icon

Step 3: Scroll through the list and select Factory Reset

Step 4: Press YES

In order to reset your 2008 Chevy Silverado back to stock you will again need to plug the tuner into your vehicle and allow it to power on. Then follow these steps:

1: Go to the Quick Link Menu

2: Click on "Performance Tuning"

3: Select "Level 0"

4: Step 4: Press YES

expert reply by: Conner L

0

Billy J.

8/8/2020

I sold my other truck so I don’t have it anymore and I want to hook it to my 2019 f150.what do I need to do to get it hooked up to new truck?

Reply

Jon G.

8/18/2020

If you no longer have the original truck the Edge tuner was installed on then you're going to need to reach out to Edge directly so they can help you get the tuner set up for a new truck. https://edgeproducts.com/

Reply

Kyle

12/7/2020

@JonG edge cts2 gas is married to another truck, truck is long gone but still married. Is there a hard reset I can do to be able to marry it to a different truck?

Reply

Jon G.

12/8/2020

@Kyle Great question! You'll actually still need to reach out to Edge directly as they are the only ones who can do a hard reset like what you're talking about.

Reply

Answer 1

Yes, once you uninstall an Edge CTS3 Programmer like part #EP69YR it will be unlocked and ready to install on a new vehicle.

view full answer...

Answer 2

The Edge Evolutoin CS2 part #EP85350 is the correct programmer for a 2014 GMC Sierra 1500 with a 5.3 liter engine but it can only be installed on one truck at a time. So if you installed it on your truck you'd have to put your vehicle back to the…

view full answer...

Answer 3

In order to factory reset an Edge Gas Evolution CTS3 Performance Tuner #EP59YR you will need to go through the following steps. 1. Enter the Quick Link menu. 2. Press the Settings icon. 3. Scroll through the list and select "Factory Reset".…

view full answer...

Answer 4

For the Edge CS Evolution Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen. From here…

view full answer...

Answer 5

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 8

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

How to Uninstall the Edge Diesel Evolution CTS3 Performance Tuner

Product Page this Question was Asked From

Continue Researching