Recommended Keyed Alike Padlocks and Hitch Locks

Question

Question:

can i get RM 308 and RM 304 keyed alike

asked by: Scott W

0

Expert Reply:

Roadmaster does not offer the Roadmaster Lock Set - Hitch Lock and 2 Quick-Disconnect Padlocks # RM-304 and the Roadmaster Quick Disconnect Padlocks (Qty 4) # RM-308 keyed alike.

The only option we have for you to get all keyed alike padlocks and hitch locks is to use the BOLT system that keys to your vehicle ignition key. For instance if you have a Ford, you would use the # BL7018519 padlock and the # BL7018447 Hitch Lock.

expert reply by: Jason S

0

Answer 1

For the 2021 Ford F-250 the correct Bolt hitch lock is the part #BL7023585 and for the 2002 it's the part #BL7018447.

view full answer...

Answer 2

For the 2021 Ford Bronco the correct Bolt hitch lock is the part #BLT99FR since the vehicle has a center cut key.

view full answer...

Answer 3

The key of your 2019 Ford F-350 should look like the keys in the attached picture which is what the Bolt lock part #BL7023585 is designed to fit. This would be the Bolt lock hitch lock you'd need which will key to your truck's key.

view full answer...

Answer 4

Yes, the BOLT Trailer Hitch Receiver Lock #BL7023582 will code to your key for the glove box(see image) on your 2022 Chevrolet Silverado 1500 LTD. We also have the BOLT Trailer Coupler Lock #BL7025287, BOLT Trailer Coupler Lock #BL7032493 and BOLT…

view full answer...

Answer 5

The key you have for your Dodge truck is unique. They don't put the same lock cores in every Dodge truck. The BOLT Lock #BL7018452 will learn your specific key profile once you insert your key into it and turn it till it stops. This lock…

view full answer...

Answer 6

The hitch pin and clevis pin locks #RM-304 referred to in Brad's video for the RoadMaster Receiver Hitch Lock #RM-315 do not have a keyed alike option so you would have two keys, one for the clevis locks and one for the hitch pin lock. Out of the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 12

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Recommended Keyed Alike Padlocks and Hitch Locks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching