What is the Adjustment Hole Diameter of the Demco 2-Tang Clevis DM12676-30

Question

Question:

What are the diameter of the bolt mounts? They are 2inch center to center, but what is the diameter of the holes? My trailer has a hitch with 5/8inch holes that would work perfectly with this if it is compatible.

asked by: Mark A

1

Helpful Expert Reply:

I did some checking and apparently the Demco 2-Tang Clevis - Adjustable Channel Mount - Black Paint - 20,000 lbs Item # DM12676-30 does have 5/8 inch diameter holes. I have included a link to a video review of it for you.

expert reply by: Michael H

1

Answer 1

Yes, the 20K weight rating of the Blue Ox Adjustable Ball Mount with Pintle Hook #BLU25XR is the same whether you're using it as a standard hitch ball or in the pintle hook application. This is a nice, solid piece of towing gear that I recommend…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

What is the Adjustment Hole Diameter of the Demco 2-Tang Clevis DM12676-30

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching