Recommended Steering Stabilizer for 2017 Newmar Canyon Star 3911 With Ford F-53 Chassis

Question

Question:

Can you tell me the model number for wiper blades for my 2017 Newmar Canyon Star 3911 motor home?

asked by: Ron W

1

Helpful Expert Reply:

For your 2017 Newmar 3911 with a Ford F-53 chassis, I highly recommend the Roadmaster Reflex Steering Stabilizer # RM-RBK22-RSSA. This is a steel spring which works by continually correcting the steering on your motorhome as it gets pushed in one direction or another, as often happens during highway driving.

It is a very popular option for the Ford F-53 chassis and has gotten consistently high ratings by those who have used it, as you can note in the reviews section of the Reflex Stabilizer's product page.

I've attached a link to a video review of this product for you to take a look at as well.

expert reply by: Kyle S

1

click to enlarge

Ron

10/11/2017

Can you tell me the model number for wiper blades for my 2017 Newmar Canyon Star 3911 motor home?

Reply

Kyle S.

10/11/2017

The windshield wiper blades which will fit your 2017 Newmar are the ClearPlus Heavy Duty Windshield Wiper Blades # CP77321. These blades are 32" and work with wide saddle and 12 x 4 hook arms. I've added a link to a video review of these blades for you to take a look at.

Reply

Answer 1

The steering stabilizer you are looking for that is a confirmed fit with your RV is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK18-RSSA. This comes with the brackets and hardware needed for…

view full answer...

Answer 2

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 3

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Recommended Steering Stabilizer for 2017 Newmar Canyon Star 3911 With Ford F-53 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching