Will the Bearing Races be Installed in the Kodiak 12 Inch Hub and Rotor Assembly
Question:
Do you have a question about part # KHR12D? Bearing Races and which Grease seals for a 2.25 Inner Diameter axle fit. Thanks.
asked by: Devin
0
Expert Reply:
The bearing races will be installed on the Kodiak Hub and Rotor Assembly, # KHR12D. The bearings for the hub are # 25580 for the inner and # 15123 for the outer.
We offer a Bearing Kit, # BK3-100, that includes both bearings # 25580 and # 15123, but also the grease seal 10-36 with an inside diameter of 2.25 inches.
expert reply by:
Jared P
0
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Q&A: What is the Grease Seal ID for the Dexter 7K Trailer Axle
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Video: Kodiak Trailer Hubs and Drums - Hub with Integrated Rotor - KHR12D Review
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Shop: Fifth Wheel Hitch
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Search Results: dust cap
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Search Results: dust caps
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)