Replacement Hub Needed for Boat Trailer with 5 on 4-1/2 inch Bolt Pattern and LM67048 Bearing
Question:
Need replacement hub for a boat trailers Its a 5 bolt 4 1/2 inch 1 1/4 inch spindel outside bearing is a LM67048
asked by: Damon
Expert Reply:
To determine what replacement hub will fit your spindle you will need the part number of your Inner Bearing, Outer Bearing, and Grease Seal. If you cannot find the part numbers then you can use a Digital Caliper # PTW80157 and measure parts B, C, and D of your spindle from the attached picture. You will want to measure them to the 3rd decimal place, like 0.725.
Currently the only hub that we have to offer which has a 5 on 4-1/2 inch bolt pattern and uses the # LM67048 bearing is the Trailer Hub Assembly # DX22XR. It uses the Inner Bearing # LM67048 (inner diameter of 1.250"), the Outer Bearing # LM11949 (inner diameter of 0.750"), and a Grease Seal with an inner diameter of 1.688". If your Outer Bearing (location D in the picture) uses the # LM67048 bearing then we currently do not have any hubs compatible with your spindle.
If this is what you spindle measures then this hub will work well for you.
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- LM67048
- LM11949
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Trailer Hub Bearing - LM11949
- Search Results: lippert axle
- Search Results: 3000 lb axle
- Search Results: wheel bearings
- Search Results: wheel covers
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Search Results: lm67048
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Q&A: What is the Estimated Installation Time for Firestone Ride-Rite Air Bags on a 2006 Ford F-250
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Shop: Brake Controller
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Shop: Fifth Wheel Hitch
- Q&A: Recommended Dexter Suspension Kit 7753400
- Article: Most Popular Wheel Bearings
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Article: Trailer Tire Sizing