Hub Needed That is Compatible with L44649 Inner and Outer Bearings and a Grease Seal with 1.25 ID

Question

Question:

Hello, Im building a small trailer and realize I purchased the wrong hubs not from you. I already have an axel Id like to use, along with some wheels and lug adaptors. Is there any way to get a set of hubs that would fit an axel with a 1 1/16 inner AND outer bearing with a 1.25 inch seal? I was looking at the AKIHUB-655-35K and it suites all my needs except for the Inner Bearing diameter appears too large 1.378. Can this work with a similar bearing, just with a smaller Inner Diameter? Any suggestions would be greatly appreciated. Thanks!

asked by: John W

0

Expert Reply:

Based off of the information that you gave me I do have some options for you but the Trailer Idler Hub Assembly # AKIHUB-655-35-K that you referenced not only has an Inner Bearing with the incorrect inner diameter, but the Grease Seal does as well and there are no options to replace it with one that has a 2.565" outer diameter and a 1.25" inner diameter.

I have linked our selection of idler hubs for you to filter through that use the 1.063" Inner and Outer Bearing # L44649. You will simply need to replace the included Grease Seal with part # 34823 which has an inner diameter of 1.249".

By clicking on the appropriate filters you can choose a hub that has a 5 on 4-1/2" bolt pattern or a 4 on 4" bolt pattern as well as what size wheels it will fit. For example; the Dexter Axle Trailer Hub Assembly # 8-258-5UC1-EZ is an idler hub with a 5 on 4-1/2" bolt pattern and is compatible with 13" - 15" diameter wheels.

If you haven't already purchased tires and wheels for your trailer the Kenda Karrier # AM31985 fits perfectly with this hub and is very popular with our customers.

expert reply by: Jon G

0

Answer 1

Trailer manufactures rarely make the details of the small parts on their trailers available specifically bearing numbers. I did some research and was not able to find the bearings that fit your ShoreLandr. I am happy to help you replace the bearings…

view full answer...

Answer 2

In order to find the correct replacement hubs for your Shoreland'r boat trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 9

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Hub Needed That is Compatible with L44649 Inner and Outer Bearings and a Grease Seal with 1.25 ID

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching