Bolt Sizes For Draw-Tite # 75282 Trailer Hitch Receiver

Question

Question:

2012 Nissan Frontier What are the bolts sizes for the hitch 75282?

asked by: Tom

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75282 has 6 Hex Bolts size M12 x 1.25 x 35mm according to the instructions along with 6 flat washers and 6 lock washers to fit in the existing weld nuts. I've attached the installation details so you can torque to specs. If you don't have a torque wrench, I recommend # ALL944001.

expert reply by: Jason S

0

Answer 1

Yes, the Curt Trailer Hitch Receiver #C38BR will fit your 2024 Mazda CX-50. This hitch has a max weight capacity of 3,500 lbs, a max tongue weight capacity of 525 lbs, and is assembled in the USA.

view full answer...

Answer 2

Yes. Wheel bolts should be torqued to the same specs as their lug nut counterparts of the same size. If you don't have a torque wrench already, the Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb #ALL944001 would…

view full answer...

Answer 3

The relay location on Nissan vehicles can be interesting. A lot of times on the Frontier it's behind the kick panel on the passenger side like where you checked but the other common location is under the dash to the left of the steering wheel…

view full answer...

Answer 4

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Bolt Sizes For Draw-Tite # 75282 Trailer Hitch Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching