Speed Rating of Trailer Wheel and Tire # AM3H320

Question

Question:

part # amh3h320. hello. do these tires have an ST speed rating or are these tires High Speed

asked by: John

0

Expert Reply:

The speed rating of the # AM3H320 is 65 mph.

expert reply by: Jameson C

0

Answer 1

I looked up the information on your TDE 46205 Hubs and found a couple of great replacements for you. The one you pick will depend on the number of wheel studs you have. For 5 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z…

view full answer...

Answer 2

Yes, the Kenda 215/60-8 Bias Trailer Tire #AM3H325 that you referenced comes with the tire mounted to the rim. For the same wheel and tire size setup but in a Load Range C you'd want the part #AM3H320 instead.

view full answer...

Answer 3

With all of our trailer tires and wheel/tire items the speed rating is J (65-mph) unless we specifically call out a different rating in the specs. Comb #AM3H325 is actually rated up to 81-mph. In this 215/60-8 tire size and 5-on-4-1/2 wheel bolt…

view full answer...

Answer 4

There are a couple of things to be aware of it you decide to switch to the smaller wheel and tire combination, #AM3H325, from the #AM3H400, wheel and tire combination. First, the hub that is on your trailer may not fit inside the smaller wheel center…

view full answer...

Answer 5

The overall width of the wheel in tire and wheel combo #AM3H325 is 8 inches. The inner width where the tire sits is actually 7 inches. Since this wheel has a zero offset the backspacing is going to be 4 inches. The tire width is 8-7/8 inches overall…

view full answer...

Answer 6

We have the Galvanized Steel Trailer Wheel #AM20028 you will be able to use with your 18.5/8.5-8" trailer tires. These wheels are 8" in diameter and 7" wide with your 5 on 4-1/2" bolt pattern. While we currently do not have the…

view full answer...

Answer 7

Actually, the wider the tire, the more of the road you are going to feel so it would actually make it worse. Skinnier tires with less road contact would be better but I think the issue has more to do with the weight of the trailer than the tires.…

view full answer...

Answer 8

As long as you have a 5 on 4-1/2 inch bolt pattern on your trailer hub the part #AM3H325 would be a great choice for you. This wheel and tire setup has a capacity of 1,165 lbs at 70 psi. The galvanized wheel would be great for preventing corrosion…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Speed Rating of Trailer Wheel and Tire # AM3H320

Product Page this Question was Asked From

Continue Researching