Brake Controller and 7-Way Installation in 1994 Ford F-150
Question:
Bought 30717 4 to 7 adaptor, already got brake controller hooked up what else i need for back end and need installation help
asked by: Craig H
Expert Reply:
To install a trailer brake controller like the Prodigy P2 # 90885 or P3 # 90195 along with a 7-way socket in your 1994 Ford F-150 the parts you'll need depend on how the truck was equipped from the factory.
If it did not come with a factory 7-way then you will need our install kit # ETBC7 as well as a 4-pole wiring harness like # 118316. If you already have a 4-pole and 4-to-7 adapter part # 30717 then all you need is the controller and a wiring kit to connect everything, part # 5506. This has wire, connectors and circuit breakers for a hardwire install.
The controller has 4 wires. The white wire is ground; the black wire is 12V input power from the battery that runs through the 30-amp breaker in the kit; the red wire is the trigger signal wire that connects to the COLD side of the brake light switch; and the blue wire carries the controller output to the 7-way socket, to the pin at the 5-o-clock position. The kit also includes a 40-amp breaker that you will use to provide the 12V auxiliary power for the trailer, which is carried on the pin at the 1-o-clock position (see photo, please).
Two linked articles on wiring and brake controllers are included to help you complete your install.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 7 Round - Blade
- Tow Ready
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: etbc7
- Search Results: 5506
- Q&A: Recommended Replacement Parts for 2 Inch Square Trailer Tongue
- Search Results: c56393
- Search Results: 7 pin connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Bumpers
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Installation - 2020 Chevrolet Silverado 1500
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2020 Buick Enclave
- Video: Review of Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM40975
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Installation - 2018 Chevrolet Traverse
- Video: Trailer Wiring Harness Installation - 2018 Ford Explorer HM40975
- Search Results: propane regulator
- Shop: Westin Fey Surestep Rear Bumper - Black Powder Coated Steel
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: receiver hitch back travel trailer
- Search Results: hitch receiver tube
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gen-Y Weld-On 2" Receiver Tube - 5-1/2" Long - Steel
- Shop: Buyers Products Receiver Tube 2" I.D. x 6" Long and 5/8" Pin Hole
- Video: Gen-Y Hitch Hitch Fabrication Parts - Receiver Tube - 325-GH-002 Review
- Video: Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT255812 Review
- Shop: Trailer Hitch
- Shop: Front Mount Hitch