Distance from Jack Tube to Back of Motor on Stromberg Carlson Electric A-Frame Trailer Jack JET-3755

Question

Question:

What is the distance between the tube and the back of the motor housing? I only have about an inch or so of clearance between the motor housing and the propane tank cover on my current power jack

asked by: Roger

0

Expert Reply:

I went out to the warehouse to measure Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black Item # JET-3755 for you. From the back of the jack tube to the back of the motor it measures 1-1/8 inches. Out of all the electric A-frame jacks this one is going to be the most likely to work for you.

expert reply by: Michael H

0

Answer 1

While your frustration is understandable and we have a solution for you, I wouldn't be able to tell you with absolute certainty that using the Stromberg Carlson Electric Trailer Jack #JET-3755 will stop your tailgate from hitting the jack. The…

view full answer...

Answer 2

All-around the Stromberg Carlson Electric Trailer Jack #JET-5000NG is nicer than the #JET-5000. The bearings in the part #JET-5000NG allow it to raise and lower much smoother and quicker, the size of the head is a bit smaller and the lighting is…

view full answer...

Answer 3

Most jacks, like the Stromberg Carlson #JET-3755, will allow you to open up the tailgate on your truck if you rotate the the trailer jack. Most people mount the trailer jack so that the controls face the direction of travel but there is nothing wrong…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 6

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 7

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 8

The Lippert Flow Max RV Toilet #LC67AF is absolutely a good option for part-time RVers who store their RV for months. The supply vale and the seal are both standard.

view full answer...

Answer 9

The Lippert Flow Max RV Toilet #LC67AF requires a minimum of 12" for the rough-in.

view full answer...

Answer 10

I have a solution for you, but the Bulldog #BD500200 is only going to be about 2" shorter than you current jack, and I think we can do a little bit better than that to make sure that you get full use of the tailgate on your 2019 Chevy Suburban.…

view full answer...

Answer 11

This is a pretty common issue with aluminum frames so we definitely have a options available for you. With that being said, the 8 inch frame height will make things a bit more difficult, but not impossible. First, the Curt TruTrack Weight…

view full answer...