Replacement Brake Shoes for 10x2-1/4 Inch Hydraulic Brakes

Question

Question:

I need 10 x 2.25 brake shoes for my boat trailer. I can not find any part numbers. are all shoes the same?

asked by: Tony

0

Expert Reply:

If you have hydraulic brake assemblies that are not free-backing hydraulic trailer brakes, then the 10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel), # BP04-120, are the shoes that you will need. One set of shoes will replace one brake assembly.

If you have free-backing hydraulic brakes then use one of the following per wheel:

Replacement Brake Shoes for Titan 10" Free-Backing Hydraulic Trailer Brakes, # T4744800.

Replacement Brake Shoe Lining for Demco/Dico 10" Free-Backing Hydraulic Brakes, # BP04-126.

10" x 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel) - Dexter Free-Backing, # BP04-123.

expert reply by: Jared P

0

Answer 1

The Dico 15638 is a 10 x 2-1/4 inch brake drum/hub that used kind of an oddball bearing setup, inner bearing LM67048 and 3/4 outer bearing LM11949. None of the hub/drums we currently carry are compatible with this bearing set. If the drums are still…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 6

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 7

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 8

Great question Troy. It would appear no one makes a custom rail kit for your 2001 Ford F-150 so you would need to use the Universal Kit #C16200 for installation on your truck. This means you will have to drill into your frame so you may want to have…

view full answer...

Answer 9

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 10

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 11

Hello Bill. 5th wheel hitch technology has come a long way in the last several years. If you are using an old hitch, it is definitely not uncommon to have issues like this. Most older hitches, and even some new lower-end hitches will chuck quite a…

view full answer...

Answer 12

Hey Trevor, so the B and W Companion Slider hitch part #BWRVK3400 only fits the B and W Turnoverball gooseneck hitches and would not fit the gooseneck hitch of your 2022 Chevy Silverado 2500 with OEM pucks. The funny thing about the Patriot slider is…

view full answer...

Replacement Brake Shoes for 10x2-1/4 Inch Hydraulic Brakes

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching