Can Fulton Hi-Mount Spare Tire Carrier 4- and 5-Lug Wheels FSTC1000301 be Mounted Horizontally  

I went out into our warehouse to grab the Fulton Hi-Mount Spare Tire Carrier #FSTC1000301 and found that the mounting holes are 3 inches apart from side to side on the mounting bracket.

I recommenced the Fulton Hi-Mount, #FSTC1000301, This carrier will fit trailer frames up to 3" x 4" and is a clamp-on mount with a corrosion-resistant finish. I have added a couple video reviews of this carrier for you to take a look at.

The Dexter DX7.5L A-60 Brake Actuator #DX89FR needs to be attached to your trailer with grade 5, 1/2" diameter bolts torqued to 80 ft-lbs. Do note if your square tube frame uses thin wall tubing you will need to insert spacers inside the frame…

We had the chance to install the Fastway coupler lock part #FA86-0015-318 on an actuator like your UFP A-60 and found that it fit and worked well. Check out the picture I attached to see the lock installed on the coupler.

For an offset spare tire carrier that would mount to the frame of your Little Guy Rough Rider trailer that would be high enough to give you good ground clearance check out the Offset Trailer Spare Tire Carrier by Dutton-Lainson #DL22120. This carrier…

According to Spectro Wire, the terminals and hardware of their #38656 junction box are chrome plated steel. The junction box actually does a pretty good job of keeping the weather out, and taking a couple of precautions like placing a dab of #38656…

I have a solution for you but The etrailer Spare Tire Carrier for Trailer with Angle-Iron Railing - Clamp On #e99045 will not fit your 2.5 inch angle iron. I recommend The Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels #FSTC1000301.…

On a trailer made of angle iron you would need to weld on a piece of steel plate to create a boxed section of frame. Once that is done you can mount the Spare Tire Carrier #FSTC1000301. Welding should be performed by a qualified professional welder.

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…