Will the etrailer.com Idler Hub Assembly AKIHUB-545-35-G-EZ-K Fit a Magic Tilt Trailer
Question:
Need yo know if fit magictilt 1-3/8×1-1/16 spine or only fir dexter
asked by: MIGUEL R
Expert Reply:
The etrailer.com Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K that you referenced is compatible with # 84 spindles. To determine whether or not this assembly is compatible with the spindle on your Magic Tilt trailer you will need to make sure that it has the same inner and outer bearings as well as the same grease seal sizes.
This assembly uses the following:
Bearings
Inner bearing: L68149 (1.378" inner diameter)
Outer bearing: L44649 (1.063" inner diameter)
Grease seal: 58846
Inner diameter: 1.719"
Outer diameter: 2.565"
If you look at the current bearings on your trailer you can check to see if it has the same bearing and grease seal numbers as what is shown. Otherwise you can use the attached picture to make sure that the B, C, and D measurements match up with what your spindle has. You can use a Digital Caliper # PTW80157 to measure to the 3rd decimal place (like 0.725).
I have also attached a demonstration video that you can check out.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Distance from Mounting Flange to Furthest Point of Tire Sidewall on the Kenda Tire/Wheel # AM3H390
- Q&A: How Come 3,500 lb Axle Trailer Hub Won't Work on Some Wheel Sizes
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Spindle Nut 1"
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-3/4
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Brake Controller
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: dust caps
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Video: Titan Trailer Brakes T2385200 Review
- Article: How to Choose the Right Trailer Hitch Class