Replacement Tonneau Cover For The TruXedo Lo Pro QT On A 2010 Toyota Tundra

Question

Question:

I have 2010 tundra with a 5 1/2 bed. I think it has a truxedo lo pro qt tonneau cover. I need a replacement cover for it and a velcro replacement. can you help me find replacement parts.

asked by: Andre

0

Expert Reply:

In order to choose the correct replacement tonneau cover for your 2010 Toyota Tundra, I would need to know if you have the factory deck rail system or not.

For vehicles without the factory deck rail system, the replacement tonneau cover for the TruXedo Lo Pro QT Soft Roll-up part # TX563701 is the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover part # TX5637-CVR.

For vehicles with the factory deck rail system, the replacement tonneau cover for the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover part # TX563801 is the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover part # TX5638-CVR.

Regardless of whether or not you have the factory deck rail system, you will want to use the Replacement TruXedo Shur-Bond Velcro Brand Fastener for 6-1/2' Beds -1-5/16" Wide part # TX1115174. We also sell the the Replacement TruXedo Tapered Weather Seal for Lo Pro QT Tonneau Covers part # TX1114731. (Please note that the weatherstripping is sold by the foot.) You will need about 20 ft to complete the job.

expert reply by: Conner L

0

Answer 1

According to Truxedo, you'll need part #TX5458-CVR. This assumes your existing tonneau cover is part #TX545801.

view full answer...

Answer 2

I see that there are 2 different TruXedo Lo Pro Soft Roll-up Tonneau Covers for your 2016 Toyota Tundra CrewMax with a 5-1/2' bed. If your Tundra has the Deck Rail System you have the Tonneau #TX563801 which uses the Replacement Cover…

view full answer...

Answer 3

We do offer just the replacement tarp portions of the various tonneau covers from TruXedo and others that we offer for your 2007 Toyota Tundra Crew Max. In order to find the correct replacement tarp you'll want to confirm which series of Truxedo…

view full answer...

Answer 4

I have just the replacement cover for you. You will want the Replacement Cover for TruXedo Lo Pro QT Soft Roll-up Tonneau Cover #TX548101-COVER. This part requires the original Lo Pro QT hardware and rails for installation.

view full answer...

Answer 5

We do have a replacement tarp for your TruXedo Lo Pro on your 2021 Toyota Tundra. If you have the #TX563701, which is designed to fit models without the deck rail system, the correct replacement tarp is the #TX5637-CVR. If you have the #TX563801 for…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Replacement Tonneau Cover For The TruXedo Lo Pro QT On A 2010 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching