Replacement Cover For TruXedo Lo Pro Soft Roll-Up Tonneau On a 2016 Toyota Tundra CrewMax 5-1/2' Bed

Question

Question:

need replacement cover for 2016 tundra crewmax truxedo lo pro

asked by: Richard S

0

Expert Reply:

I see that there are 2 different TruXedo Lo Pro Soft Roll-up Tonneau Covers for your 2016 Toyota Tundra CrewMax with a 5-1/2' bed.

If your Tundra has the Deck Rail System you have the Tonneau # TX563801 which uses the Replacement Cover # TX5638-CVR.

If you do not have the Deck Rail System you have the Tonneau # TX563701 which uses the Replacement Cover # TX5637-CVR.

expert reply by: Bud M

0

Answer 1

In order to choose the correct replacement tonneau cover for your 2010 Toyota Tundra, I would need to know if you have the factory deck rail system or not. For vehicles without the factory deck rail system, the replacement tonneau cover for the…

view full answer...

Answer 2

We do have a replacement tarp for your TruXedo Lo Pro on your 2021 Toyota Tundra. If you have the #TX563701, which is designed to fit models without the deck rail system, the correct replacement tarp is the #TX5637-CVR. If you have the #TX563801 for…

view full answer...

Answer 3

Based on both the photo and description you provided, it looks like you have the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover which is part #TX563701 if you do not have the factory deck rail system or part #TX563801 if you do have the factory deck…

view full answer...

Answer 4

Thanks for the information. I checked with TruXedo and to replace just the cover on your 2012 Ford F-150's 5-1/2' bed you will need the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover item #TX5671-CVR. You will want to put…

view full answer...

Answer 5

Hi Larry, So we have a couple bumpers that may work, though each is 96 inches long. They can be cut to length though, and the difference is their width, as one is 3" wide and the other 4" wide to fit different size bumpers: - Pre-Drilled…

view full answer...

Answer 6

Hey Tim, thanks for the picture of your current brake assemblies. While what you have doesn't look exactly like a free-backing setup you definitely can replace what you have with them. For that I would go with the etrailer part #AKFBBRK-35 which…

view full answer...

Answer 7

Based on the information you provided either the Titan Hydraulic Brake Kit - Free Backing - 10" - Left and Right Hand Assemblies - 3,750 lbs #T4071600-500 or #T4423500-400 will fit your drums. The only difference between these two brakes is the…

view full answer...

Replacement Cover For TruXedo Lo Pro Soft Roll-Up Tonneau On a 2016 Toyota Tundra CrewMax 5-1/2' Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching