Replacing a Shelby 1,000 lbs Trailer Jack With a Similar Fulton Jack
Question:
I have a weld on Shelby bolt through jack 1000 lb capacity that needs to be replaced. What Fulton jack would fit that mount? Is there an adapter plate that could be bolted on?
asked by: Gary C
Expert Reply:
Since we do not have a Shelby jack mounting bracket that goes to the discontinued Shelby Jack # 5876A8, I have no way to confirm whether or not a Fulton jack will fit it.
With that being said, the Fulton Bolt-Thru Swivel Marine Jack # F1411300301 is almost identical to the Shelby Jack # 5876A8 that was referenced. It has a 10 inch lift, is rated for 1,500 lbs, has an extended bracket height of 24-3/4 inches, and will mount to a 3 x 5 trailer frame.
The Fulton Mounting Bracket that is compatible with this jack can be found with part # P9012-00 on our site.
Products Referenced in This Question
Jack Mounting Bracket for Fulton Marine Jack - Weld-On
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Fulton
more information >
Product Page this Question was Asked From
Fulton Boat Trailer Jack w/ Wheel - Weld On - Sidewind - Swivel - 10" Lift - 1.5K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Continue Researching
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Video: Review of Dutton-Lainson Trailer Winch - Brake Hand Winch - DL14730
- Shop: Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Stainless Steel - 14" Wheels - Qty 2
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs
- Video: Review of Dexter Brake Actuator - Replacement Master Cylinder Assembly - T1777401
- Video: Fulton Trailer Jack - Side Frame Mount Jack - F1411300301 Review
- Q&A: Magnum Series Jack Replacement For Boat Trailer
- Q&A: Replacement For Shelby Jack With Weld-On Mounting Bracket
- Video: Review of Fulton - Trailer Jack,Camper Jack - P9012-00
- Video: Fulton Trailer Winch - Standard Hand Winch - F142401 Review
- Article: How to Measure a Trailer Axle
- Video: Review of etrailer Trailer Fenders - Slant Back Tandem Axle Fender Kit - HP54VR
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Spring Mounting Hardware - K71-448-00
- Shop: Replacement Shackle Link with Bolts for Dexter Trailer Suspension Kits
- Shop: Dexter Heavy-Duty Shackle Link for 1-3/4" Wide Double Eye Spring Suspension Kit - Qty 1
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Q&A: 2-1/2 Inch Shackle Straps Are Flipping After Replacing Leaf Springs
- Q&A: Replacement Suspension Kit For A Dexter 13-10 Tandem Axle
- Search Results: fenders
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Search Results: equal~i~zer
- Search Results: equalizer
- Search Results: springs
- Search Results: leaf spring shackles
- Search Results: safety chains
- Search Results: 3500 lb hub
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Dimensions for Fulton Replacement Bolt-On Mounting Kit # F500349