Recommended Trailer Hitch for 2017 Ford Focus
Question:
Are there any 2inch receiver mounts available for a 2017 Ford Focus Hatchback SE? I am reading that 1-1/4inch is the usual size but Im trying to use my existing 2inch bike mount and would like to avoid using an adapter that extends the rack farther from the bumper. Thanks!
asked by: Greg
Expert Reply:
All of the available trailer hitches for your 2017 Ford Focus Hatchback SE are Class I hitches with a 1-1/4 inch receiver opening. This is most likely because the vehicle itself simply does not have the capacity that a higher class trailer hitch (and larger receiver opening) will provide.
For your vehicle, I recommend the Curt Trailer Hitch Receiver # C11158. This is custom fit for your Ford Focus and I have attached the installation details for you to check out. I recommend the Curt over the Draw-Tite model that is also confirmed to fit your Focus because it does not include a built-in stopper that prevents certain bike racks from fitting properly. Per Curt warranty, you will just need to use stabilizing straps like # 18050 with bike racks and cargo carriers.
As you mentioned in your question, the only way to use your existing 2 inch bike rack with a trailer hitch on your vehicle is going to be with an adapter like the Brophy # HTAD. Keep in mind that when using this or any similar adapter, the tongue weight capacity of the hitch will be reduced by 50%. This means that the 200 pound tongue weight capacity on the above mentioned Curt hitch will be reduced to 100 pounds when using the adapter. As long as you stay under the reduced weight capacity, this adapter is perfectly safe to use. Also note that the most bikes you can load onto a Class I hitch bike rack is 2.
I have attached a link that will take you to our available selection of bike racks that are designed for Class I trailer hitches that you may want to look through.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 7-1/4 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- Brophy
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Trailer Hitch Receiver Sizes
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Flat Towing Package for 2008-2011 Honda CR-V
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Curt T-Connector Fit 2015 Ford Focus ST Hatchback
- Article: What Do I Need To Tow A Trailer?
- Q&A: Trailer Wiring Harness Recommendation for a 2014 Ford Focus ST Hatchback
- Q&A: How Can I Get Additional Trailer Wiring Signals at the Rear of my Durango
- Q&A: How Does Hitch Tongue Weight Rating Affect Use of a Motorcycle Carrier on a Toyota Sienna
- Q&A: Curt Echo Brake Controller for 2023 Jeep Grand Cherokee 4xe
- Q&A: How To Wire Up Hopkins Engager Push-To-Test Trailer Breakaway Kit