Troubleshooting New Trailer Brakes that Dont Engage with Multiple Trucks
Question:
Have an 07 load trail deckover with 7k axles. Brakes suddenly stopped working altogether. We replaced the shoes and magnets on all 4 wheels. I told the boss to just buy all new backing plates w/ everything and it would be cheaper and easier. Then adjusted up brakes and now we get barely any breaking power. The magnets are working and seem to be working much better than the old ones with the trailer jacked up in the brakes engaged via a battery you cannot turn the wheels even with a 6ft breaker bar. But as soon as the trailer is towed behind a vehicle they dont work at all. Have tried multiple trucks and check the wiring everything seems good on that end what could it be? We are stumped.
asked by: Ryan P
Expert Reply:
You know the brakes themselves work because you can test them with a battery. It sounds to me that the issue is in the trailer's connector or the wiring. I would try replacing the connector with something like # HS381-9000.
You can try testing for the problem in the connector by plugging the trailer into a truck and then using a tester on the brake wire on the 7-way just a few inches behind it.
Product Page this Question was Asked From
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Continue Researching
- Shop: Bulldog Winch Combo Axle/Ratcheting Vehicle Tie-Down Straps - Qty 4
- Video: Bulldog Axle and Ratcheting Tie Down Straps with Bag Review
- Video: Review of Bulldog Winch Car Tie Down Straps - Vehicle Axle Ratcheting Tie-Down Strap Set - BDW20230
- Article: Trailer Jacks
- Video: Review of Shocker Hitch Hitch Fabrication Parts - Weld On Vertical Channel Trailer Mount - SHK37MR
- Video: Review of Titan Chain Lashing Winch - Sliding Winch - TCLR900
- Video: Stallion Stabilizer Jacks Review
- Shop: Buyers Products 3/4" Forged D-Ring With Weld-On Mounting Bracket
- Shop: Shocker Trailer Tongue Mount - Weld On Vertical Channel
- Shop: etrailer Sliding Winch Track - 6' x 4-5/8" x 1/4" - Steel
- Shop: Ramp Spring - 2K Torque for 1-1/2" Round Shaft - LH
- Shop: Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
- Shop: Ramp Spring - 2K Torque for 1-1/2" Shaft - RH
- Q&A: Recommended Battery for a 12,000 Lb. Electric Car Trailer Winch
- Q&A: Recommended Axle Ratcheting Tie-Down Straps for 2017 Top Hat 20 Metal Deck with 6k Swivel D-rings
- Search Results: c channel
- Search Results: tie down straps
- Search Results: sliding winch
- Search Results: receiver tube
- Search Results: corner protector
- Search Results: ramp spring
- Search Results: trailer tire
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How To Charge Camping Trailers Battery While Driving Using The 7 Way RV Plug
- Q&A: Can Trailer Brake Assembly Magnets be Grounded to Trailer Frame
- Q&A: How to Test Brake Magnet Amperage on a Trailer with 4 Brakes
- Q&A: Troubleshooting Trailer Brake Wiring on Coupler Solenoid For Backing Up
- Q&A: Upgrading 4-Way of Trailer to 7-Way to Wire Battery for Powering Trailer Interior/Exterior Lights
- Article: Trailer Wiring Diagrams
- Article: Ram Trailer Tow Prep Package