Does SumoSpring Kit part # SSR-280-54-1 Require Drilling

Question

Question:

Im looking at a set of Sumo Supersprings for my 2010 W22 Workhorse Class A rv. Your site say no drilling. Is this a new design because the videos i have watched show drilling into the frame.

asked by: Kenny A

0

Expert Reply:

Not all SumoSpring kits install the same. The part # SSR-280-54-1 that you referenced though does not require drilling unlike others.

I attached a set of install instructions for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Hello John. I can definitely point you in the right direction, but I will need more information from you. Can you tell me the sub-model/floorplan of your 2017 Sunseeker Class C Motorhome? I will also need to know the chassis manufacturer in order to…

view full answer...

Answer 10

Hey Dave, Air Springs and SumoSprings both fall under the same category with the main goal to help prevent sag but offer different styles of solutions. Air springs offer the adjustability to help level your ride back out, which can make a huge…

view full answer...

Answer 11

Yes, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK13-RSSA would be a compatible fit for your 2007 Winnebago Adventurer on a Workhorse W24 Chassis.

view full answer...

Does SumoSpring Kit part # SSR-280-54-1 Require Drilling

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching