Comparing The Kuat NV 2.0 Base To the Kuat NV 2.0

Question

Question:

I am looking at the Kuat NV 2.0 or the Kuat NV 2.0 Base. Can you tell me the difference between the two models and whether or not I would be able to open the rear tailgate on my 2014 Prius V with either rack installed. Thank you in advance.

asked by: Steve C

0

Expert Reply:

For your 2014 Prius V, the Kuat NV 2.0 2-Bike Platform Rack - 1-1/4" Hitches - Tilting - Aluminum - Metallic Black # NV12B or the Kuat NV 2.0 Base 2-Bike Platform Rack - 1-1/4" Hitches - Tilting - Aluminum - Matte Black # BA12B will allow you to open the rear gate of your Prius. The tilting functions will give you a little additional space to let you load and unload cargo.

The difference between these two bike racks is that the Base model does not come with the repair stand which can be added ( # TDKB ) and is 3 lbs lighter. Other than those minor differences, the racks are almost identical. They both include the bike and hitch locks for security.

expert reply by: Jason S

0

Answer 1

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 8

The advantage of a folding carrier like part #e98874 is, obviously, that it it can fold up for rear clearance when you don't have anything loaded on it. The disadvantage of a folding carrier is that since there are more hinges and connection…

view full answer...

Comparing The Kuat NV 2.0 Base To the Kuat NV 2.0

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching