Measurements Needed For Replacement Hub Assemblies Compatible With Spindle
Question:
I want to upgrade my hub assembly on my 2000 Spartan boat trailer. I just repacked the bearings and put in a new grease seal. The numbers on the present hub are, BT-150 and KO followed by either a 3 or a 9, hard to read, And an R, and the letters MGI. Can you tell me if you know what hub assembly I would need? preferably one that has the bearings already packed. It is a 2090lb trailer with 13x4.5 inch tires. Thanks...
asked by: TOM H
Helpful Expert Reply:
Unfortunately I cannot tell you what you need based on that info. If you can give me the bearing numbers on the inner and outer bearing of one of your hubs along with the seal number I can help. There are very rarely pre-packed assemblies, but every so often we have on that is a match.
If you can't get me bearing numbers, if you use a digital caliper like the 4" Carbon Fiber Digital Caliper # PTW80157 and take pictures of the measurements on your spindle where the bearings and seal ride, I can help from that information. I've attached a photo to help.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Shop: Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Search Results: 1/2 20 lug nuts
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Shop: Replacement DeeMaxx Trailer Wheel Lug Nut - Zinc Plated - 1/2" - Qty 1
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty 4)
- Video: Redline Tires and Wheels 7-122 Review
- Video: Redline Tires and Wheels 7-150 Review
- Q&A: How Much Smaller Should Hole Be Drilled for Press-In Wheel Studs
- Search Results: lug nut
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
- Search Results: trailer wheel studs
- Search Results: wheel stud
- Q&A: How To Determine Which Spare Hub Assembly Is Correct For Spartan Sport Boat Trailer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Replacement Wheel Stud 1/2" Diameter x 2" Long
- Search Results: hub
- Search Results: bt 150 hub
- Search Results: trailer hub kit
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-1K Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-1K Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-1K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-EZ-1K Review
- Q&A: How To Remove Spindles From Trailer Axle
- Q&A: How To Measure Inside Diameter Of Trailer Hub For Bearing Buddy Protector
- Q&A: Where are the Bearings for the eTrailer Trailer Hubs Made
- Q&A: Replacement Bearings, Races and Oil Seals for Ranger Tandem Axle Boat Trailer with Cool Oil Hubs
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
on Hand Tools
