How To Determine Which Spare Hub Assembly Is Correct For Spartan Sport Boat Trailer
Question:
Hi guys, I have a spartan sport trailer boat trailer that i use for my 15foot Lund boat. Im getting ready to take the boat on vacation with the family and am looking for a complete hub and bearing assembly to have a s a spare. I just greased the bearings and spun the wheels and and checked them for any movement and they seem to spin well and sound good. I dont want to be that guy on the side of the road. Do I need to take the hub off to determine what i need? Thanks for your help
asked by: Scott C
Expert Reply:
I would be happy to help!
Unfortunately we do not have a breakdown of the specific components for your Spartan Sport Trailer, so you will need to remove one of your hub assemblies.
With the hub assembly removed you will need to look on the face of both the inner and outer bearings for the bearing number. This will be stamped in the face of the bearings as shown in the included picture of the # L44649.
If your bearing numbers are not readable you will need to use digital calipers # PTW80157 to precisely measure your spindles in the locations shown in the included diagram.
If you can provide the above information I would be happy to confirm the correct spare hub assembly for your trailer.
![Samuel C](https://images.etrailer.com/static/images/catg/people/2240_tn.jpg)
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Torque Rating For the Four Bolts On The CE Smith Trailer Hub # CE13100
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Comparing Timken Bearing Kits TMK34ZR And TMK54ZR
- Article: Most Popular Wheel Bearings
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Idler Hub For 1964 Holsclaw Boat Trailer With 1" Diameter Spindle
- Q&A: Measuring the Bolt Pattern of a Trailer Hub and is there a 4 on 3 Inch Bolt Pattern
- Q&A: Are Any Trailer Tires Made in the USA
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires