What Grease Seals Do I Need For An # 84 Spindle
Question:
I cant find this size anywhere. Seals I found have 2.565inch OD which is too much to press fit into the 2.550 inch Bore in the hub. My spindle dias. are 1.060inch and 1.375inch and the seal race is 1.725inch dia. Am I off on my press fit amount?
asked by: Herman H
Expert Reply:
If the inner diameter bearing on your spindle measures 1.38" and the outer diameter bearing measures to be 1.06", then you have a #84 spindle such as part # TRU24FR rated for 3,500 lb. trailer axles. The correct grease seals for this spindle are Grease Seal - Double Lip part # 58846 which has an inner diameter of 1.719" and an outer diameter of 2.565". As the grease seals are a very tight fit, you may want to use a block of wood and mallet to get the seals to seat properly.
Attached is a video guide that will show this process being done.
If you need bearings, races, and seals you will want the Bearing Kit for #84 Spindle part # BK2-100.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: How Tight Should Trailer Bearings Be When Installing on a Spindle
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Seals - BB60011 Review
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 38" Axle Spacing
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1 Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Search Results: galvanized leaf springs
- Search Results: trailer suspension parts
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Shop: Brake Controller
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
on Trailer Spindles
