Weight Distribution Recommendation for Keystone Springdale Limit Edition 270 LE 33
Question:
Help, looks like Im with a lot others. My first Truck and trailer. I got a 2013 f150 supercrew twin turbo. And a 27ft keystone springdale 7000 camper. I drive a tanker for a living. I was scared the hole way home. What system do I need?
asked by: Keke F
Helpful Expert Reply:
Sounds like you are looking for a weight distribution system.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
If your trailer weighs 7,000 lbs that means your tongue weight is going to be between 700 and 1,1050 lbs so the Strait Line System part # RP66084 would be your best option. This has a range of 600 to 1,200 lbs and features only sway control to fight sway before it starts.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?
- Q&A: What Does Underslung Coupler Look Like for Picking Out B and W Continuum Weight Distribution
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Comparing the Equal-i-zer Hitch Vs The Reese Wieght Distribution Hitch With Dual Cam Sway Control
- Q&A: Can Strait Line Weight Distribution be Used with Feather Lite Trailer