Firestone Ride Rite Suspension Enhancement Recommendation for 2006 Toyota Tacoma

Question

Question:

Just want to make sure they fit in a 2006 tacoma 4L trd sport 4x4

asked by: Adam

0

Expert Reply:

Yes, the Firestone Ride Rite kit part # F2407 that you referenced is a confirmed fit for your 2006 Toyota Tacoma. It's also a fit for the PreRunners and the non-PreRunners too.

expert reply by: Jameson C

0

Answer 1

The suspension enhancement 2019 Toyota Tacoma I recommend the the Firestone Ride-Rite Air Helper Springs #F2407 because they will help reduce the sag in your truck when towing and will benefit your Tacoma even when you are not towing by reducing the…

view full answer...

Answer 2

The Firestone Ride-Rite Air Helper Springs part #F2407 which are a fit for a 2015 Toyota Tacoma are designed to attach to the leaf springs so any modifications to these springs such as add-a-leaf could render the system incompatible so I cannot…

view full answer...

Answer 3

I spoke with my contact at Firestone about your 2013 Toyota Tacoma Pre-Runner. If you have 2 wheel drive the Firestone Ride-Rite Air Helper Springs , part #F2407, will work for you along with a couple of other items. I have attached a link to an…

view full answer...

Answer 4

I attached a picture that shows how the Curt Hitch part #13703 attaches to an I-beam frame like what your 2013 Keystone RV Outback Terrain 273TRK Travel Trailer has. I also attached an install link that has this picture as well.

view full answer...

Answer 5

Yes, the Firestone Ride-Rite Air Helper Springs part #F2407 will work on a 2017 Toyota Tacoma so long as the axle is below the leaf springs. That said, you'd also need the Firestone Axle Bracket Extension Kit for Lifted Vehicles part #F2506 to…

view full answer...

Answer 6

To determine the size of spacer that you will need to install #F2304, you will need to measure the space between the bottom of the frame to the top of the axle. If this measurement is 6-1/2 to 7-1/2 inches you would need a 1.25 inch spacer set…

view full answer...

Answer 7

The best option for leveling while towing/hauling is an air bag kit because there is no additional setup like a weight distribution system and they can be adjusted easily to get the perfect mix of comfort and support. I recommend the Firestone…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Firestone Ride Rite Suspension Enhancement Recommendation for 2006 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching