Replacement Hub and Drum Assembly for 3,500 Pound Axle with 6 on 5-1/2 Bolt Pattern
Question:
Hello, I need a replacement brake drum. The part number stamped on the drum is RVD-H-65535. This is on a work/player camper. It is a 6 lug bolt pattern. Do you have a drum that will replace this?
asked by: Matthew P
Expert Reply:
The 65535 likely stands for your 6 on 5-1/2 bolt pattern on a 3,500 pound axle. Which means your bearings numbers should be # L68149 and # L44649, inner and outer. You'll want to verify these are correct before purchasing.
If I'm right about the bearing numbers the correct replacement hub and drum assembly is # AKHD-655-35-K for standard spindles and # AKHD-655-35-EZ-K for E-Z lube spindles.
If you have different bearings let me know the bearing numbers and I'll find the correct hub for you.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Shop: Mounting Hardware for 10" Single Brake Assembly
- Shop: Trailer Spindle Nut 1"
- Search Results: spindle nut washers
- Q&A: Troubleshooting Brake Controller that Gets Warm to Touch
- Search Results: dust cap installation tool
- Search Results: 12 inch electric brakes
- Shop: Brake Controller
- Search Results: castle nut
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer brake controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: Most Popular Wheel Bearings
- Search Results: brake controller
- Shop: Trailer Hitch
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Search Results: trailer brakes
- Video: etrailer Electric Trailer Brake Kit Installation
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Shop: Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
