Will A Ventline Vanair Roof Vent Part # VP-543SP Fit On My 2015 Ford Transit T350?

Question

Question:

My T350 had airbags and a headliner. Can this be installed. ideally Id like to install it in the rear of the vehicle.

asked by: Rick P

0

Expert Reply:

The Ventline Vanair Trailer Roof Vent w/ 12V Fan part # VP-543SP is a universal fit. In order to ensure proper fitment, you will need to consider a few things. The first of which involves the placement of the vent.

Per the manufacturer's instructions, the Ventline Vent is not designed to be used above bathtubs, showers, or cooking ranges. You may also want to consider if there are any existing components on your vehicle's roof that would interfere with this product, as you will be cutting a 6-1/4" hole for installation.

The Ventline Vanair Trailer Roof Vent is made to be installed on an RV therefore, the mounting depth of the vent is designed to accommodate for the added thickness on the roof of an RV, You may need to add additional reinforcements or shims for a proper installation.

A proper installation of this product will require the use of 12 volt electrical connections in addition to our Installation Kit - for Ventline Ventadome Trailer Roof Vents part # RVIKIT100.

I have attached a video review of this product for your viewing.

expert reply by: Conner L

0

Answer 1

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 2

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

view full answer...

Answer 3

Yes, the Ventline Vanair Trailer Roof Vent w/ 12V Fan #VP-543SP is the same as the 690266-01 that's already in your Airstream. I recommend picking up some plastic trim panel tools like #PTW80647 to help pull up the old sealant without…

view full answer...

Answer 4

The MaxxFan Dome Roof Vent part #MA00-03812W will work just fine on passenger vehicle with thin metal roof as many others have done so as well. That said, you will need to add some material like plywood between the roof and fan to get the required…

view full answer...

Answer 5

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…

view full answer...

Answer 6

It definitely is the circuit board of your MaxxAir roof vent and the correct replacement is the part #MA10A04751KS.

view full answer...

Answer 7

Yes we do, for your AL-KO 10k axles the correct caliper for the left hand side of your trailer would be the #BP18-050. For the right hand side the part number is #BP18-060. For replacement pads you would want the Disc Brake Pads part #BP04-400.

view full answer...

Answer 8

When measuring for a replacement vent lid, you will want the outside dimension of the housing that extends through the trailer roof. This dimension is typically 14 by 14 inches. Closely examine the remaining portion of the vent, looking for a…

view full answer...